Heat pumps work by moving heat from one area of a house or building to another to provide a comfortable environment. A practical solution when seeking this environmental comfort, is Carrier’s 50RHE006-060 Aquazone. This unit is an excellent choice for the utmost efficiency and high quality performance. These quiet-running units have received some of the highest ratings attainable in the heating and air conditioning industry.
When looking for an HVAC system to cool your home, either a heat pump or air conditioner will do the job. Both systems use compressed refrigerant to collect heat from inside your home as air passes over the coil in the air handler and transfer it outside. Heat pumps and air conditioners essentially move heat from inside your home to an outdoor location. It is often thought that air conditioners cool a home by producing cold air, but the truth is they cool your house by removing heat energy from the home, pumping it away to a location outside the home, look for Dangers Associated With DIY Air Conditioner Repair and learn a few tips. Air conditioners pump heat out of a home, just like a heat pump when operating in cooling mode. See the similarities? In fact, if looking at the outdoor unit of an air conditioner and heat pump system, it would be very difficult for the average person to tell them apart. So, from a cooling perspective, minus a few technical details, heat pumps and air conditioners are essentially the same when operating in cooling mode, with no significant difference in operation, efficiency, or energy costs.
Each of the 50RHE006-060006060 cabinets comes fully insulated to reduce the transmission of noise. It offers heating COPs to 4.7, and cooling COP to 4.6, and is designed to be installed horizontally with factory installed hangar isolation brackets. Horizontal heat pumps such as this, have airflow configurations in four patterns that include left, right or back discharge and left or right return. Water temperatures can range from -6.7 C and 43.4 C. This extended range offers the most design flexibility for each of its applications. If you’re wondering what is dual fuel hvac systems, they combine two energy sources, typically a gas furnace and an electric heat pump, providing efficient heating options for different conditions.
The Carrier 50RHE006-060 AQUAZONE is constructed from sturdy, galvanized steel and includes a condensate pan that has been coated and fully insulated. The compressors are available in a specially designed rotary unit or in a scroll unit. The compressor isolating springs are selected specifically for each different compressor size. It includes a high-pressure switch as a safety feature, a low air temperature sensor to keep the unit from freezing, and a low pressure sensor to warn users should a loss of refrigerant occur. All components are designed for durability, endurance and minimal maintenance. Owners can avail the heat pump maintenance in dayton oh for this unit. No 50RHE006-060 Aquazone leaves the manufacturer without factory validation of testing for proper operation. It comes fully ETL, UL and CE certified.
Easy to install and maintain, Carrier 50RHE006-060 AQUAZONE can be installed in a short amount of time and without the high costs associated with installing some competitor’s units. Each unit comes pre-wired and fully charged with refrigerant. The FPT condensate drains and water connections are securely anchored to the exterior cabinet of the unit. Carrier has compensated for the problem of installing this unit in corrosive environments by offering a factory installation option that offers E-coated coils.
Noted for its ease in maintenance, this unit is equipped with a 3-way compressor access, and an easily removable control box to give users access to all of the unit’s refrigeration components. Having the flexibility to mount it in attics, closets, ceilings and so forth, makes this unit fit well into any building’s environment. The easy-to-access removable panels make getting to the compressor virtually effortless. Filters can be changed quickly and easily without having to use tools, and it requires easy-to-find 25.4 mm. standard filters. There is no need to disconnect the ductwork to service the blower housing, and the blower units themselves, have bearings that have been permanently lubricated. There are quick disconnects on the exteriors of each components to allow easy electrical disconnection.
The heat pump features an anti-short cycle and random start delay as part of their eight different standard safeties. Others include high/low refrigerant pressure protection, a an overflow sensor for the condensate, protection from high or low voltage, protection against air coil freeze, and others.
A two-way control valve that has been motorized, is an option with this unit. The unit comes with a microprocessor control with direct digital controls, and a reversing valve, water-to-refrigerant coaxial coil.
Carrier uses a standard microprocessor board that is loaded with features to give users ease and reliable control operation. The unit’s compressor is controlled by means of a standard unit, solid-state control system. The control board has been lauded as one of the most low cost, friendly and technically advanced control boards available anywhere. Among of its many standard features, the heat pump include a random start delay that issues a random delay in energizing each WSHP unit to minimize electrical demand during peak hours when the unit starts up from the various operating modes, or after there has been a power outage in the building. It offers safety protection for either excessively high or low voltage conditions. If a fault occurs 3 sequential times, a lockout will occur. The unit will automatically start up if the fault has cleared if before 3 attempts. It also includes a performance monitor that checks water temperatures to let users know when the pump is not operating effectively or when it is operating beyond normal operating range.
The cost of the Carrier 50RHE006-060 AQUAZONE High Efficiency Water Source Heat Pump varies. Depending on what the customer needs at the time, a system that covers an entire house that has not yet been equipped with ductwork, can roughly run from $4,500 – 6,000 and higher. Much of the price is determined by how many indoor units are needed. Installation that includes taking away a customer’s old equipment depends on the location, but can realistically cost around $8500.
Leave a Reply